-
LOWCELL ST Ultra-thin polypropylene(PP)foam board 0.5-1.0mm
Lowcell ST is a supercritical non-crosslinked continuous extrusion ultra-thin foamed polypropylene board with a closed-cell independent bubble structure. It has a 2x foaming ratio, a density of 0.6g/cm³, and is available in thickness specifications ranging from 0.5 to 1.0mm. As a high-performance protective material that combines multiple excellent properties, the ultra-thin PP foamed board is suitable for various electronic devices and precision instruments.
-
LOWCELL U polypropylene(PP) foam borad for radome
Lowcell U is a supercritical non crosslinked extruded foamed polypropylene board with closed cell and independent bubble structure. The foaming rate is 2 times.The density is 0.45-0.5g/cm3, thickness is 7mm. In view of its light weight, excellent bending modulus and impact strength, as well as the low dielectric constant of polypropylene, which does not affect the signal transmission, it can be used as the core material of radome.
-
LOWCELL polypropylene(PP) foam board cover plate 10.0mm
Lowcell is a supercritical non-crosslinked extruded foamed polypropylene sheet with closed-cell independent cell structure. 2 times the expansion ratio, density 0.45-0.5g/cm3, thickness 10mm. It is an ultra-thick polypropylene foam board with near-perfect performance. Compared with polypropylene board with the same expansion ratio, foamed high-density polypropylene has higher strength and hardness, making it have better rigidity and compression resistance. We live in a dusty environment. Dust is everywhere and can accumulate inside the equipment, or in the turnover boxes of the parts production workshop, etc., negatively affecting its performance and lifespan. In order to solve this problem, we developed this 10mm PP foam board cover, which is a very simple and effective protection measure to isolate dust and dirt from the outside world. You can use our products with confidence.
-
LOWCELL polypropylene(PP) foam board automotive flooring 9.0-10.0mm
Lowcell is a supercritical non-crosslinked extruded polypropylene foam board with closed-cell independent air bubbles. The product has a foaming ratio of 2x, a density of 0.5-0.6 g/cm³, and a thickness of 9-10 mm, making it a high-performance, thick polypropylene foam board. In the field of modern transportation manufacturing, material selection is a crucial step in vehicle development, and flooring places stringent requirements on the substrate. We have specifically developed this three-layer polypropylene foam board for automotive flooring applications, making it widely compatible with various vehicle types, including vans, minivans, and electric tricycles. Utilizing a unique foaming structure design, this board achieves lightweight design while maintaining excellent cushioning and pressure resistance, as well as waterproofing and chemical corrosion resistance. Whether facing extreme weather conditions or long-term daily wear and tear, it reliably protects the safety of cargo inside the vehicle, contributing to improved overall vehicle durability and extended vehicle lifespan.
-
LOWCELL polypropylene(PP) foam sheet material box assembled by fasteners
Material boxes are commonly used in factories.Mostly use polypropylene(PP)foam sheet(expanded 2 times) as Material box. Harder than 3 times foamed board.Because the sheet is closed cell foam extrusion,so it is not easy to accumulate ash.The material box made of polypropylene(PP) foam sheet will be lighter.This is its advantage.The connecting fastener used in the material box was designed by our company.At present, the fastener is more suitable for board with a thickness of 4-5mm, the most used thickness for making material boxes.Our polypropylene(PP) foam sheet can make many kinds of boxes.
